WINNEBACH HYDROELECTRIC POWER STATION
-
The hydroelectric power station is located nearby Winnebach brook in Villetta/Dörfl, Vandoies, at 800 meters above sea level.
It is partly built into the slope, since the building area was extremely reduced. the project consists of a simple but polygonal volume, which is formally adapted to the landscape and the local conditions.
The station is conceived as an artificial rock quarried out of the slope. This sensation is underlined by a very reduced use of materials (concrete, glass and steel) in their rougher form, as well as by the “veins“ which cross the volume.
These “veins” consist of light bands of layered glass and run around the building. at some specific points of those light bands a normal single glass delivers insight to the power station‘s bowels.
The main building material is watertight concrete, which was pigmented with white mortar and after treated with hydraulic jet in order to achieve a raw appearance.
The building has two storeys — a ground floor and a basement. The basement shelters the generating set, the distributing unit and the wire room, control tank as well as a storage room.
The generating set room extends to the whole building height and is accessible by ground floor. The ground floor itself contains the space for the utility companies and the control room of the power station.
Photo credits: Monovolume
Countries: ITALY
Categories: INDUSTRIAL ARCHITECTURE
Designer: MONOVOLUME ARCHITECTURE + DESIGN
Status: Completed
Inaugurazione: 2009
1870 Projects
Mediapyramid ARCHITETTURA
MEDIA PYRAMID COLLEGATE
